Frequent
Questions
What
makes the HeatMAX unique?
The HeatMAX operates on the principle of Resonance. By way of its
patented Neodymium super conductors it generates the specific resonance
frequency that when installed over the fuel line, will fracture the
hydrocarbon chains in the passing fuel.
What
is the difference between the HeatMAX and the Super FuelMAX?
The "HeatMAX" is the identical unit as the Super FuelMAX, but with different
packaging for different use and application. Each are for use with fuel
lines of up to 2.54 cm in diameter.
What
is resonance?
A vibration of large amplitude caused by a relatively small or nearly the
same period as the natural periodic stimulus of the system and or
enhancement or particle reaction or a scattering event by excitation of
internal motion in the system. An example would be an opera singer
shattering a glass with his or her voice.
What
is a hydrocarbon?
An organic compound containing only carbon and hydrogen occurring in
petroleum and natural gas.
What
are hydrocarbon chains?
Hydrocarbon molecules that cluster and grow causing molecules to be trapped
from air during the combustion process.
What
kind of fuel will the HeatMAX work on?
All homogenous fuels such as heating oil, diesel and propane.
Does
the HeatMAX work with natural fuels?
With natural fuels, which are extremely efficient already, there is not as
much room for substantial improvement results as there are with home heating
oil, which can be reduced by up to 20%! However, in some areas, natural gas
is so costly that even small improvement (3-5%) makes this worthwhile.
Why
can't the oil companies provide the boost?
Because the fracturing of hydrocarbon chains occurs only when the fuel is
passed through the HeatMAX. When the burner is turned off the
fracturing of hydrocarbon chains stops and in a matter of hours the
condition of the fuel returns to the more congested state. The phenomena of
fracturing the hydrocarbon chains only can be induced by the HeatMAX.
Is
there any harmful reaction from using the HeatMAX?
No.
Is
installation easy?
Simply install you HeatMAX on the feed line to the burner,
as close the the burner as possible.
When
will the HeatMAX start working?
Immediately. However, the fuel that is in the line between the HeatMAX
and the burner will have to be used up first.
The
homes in my area do not use oil furnaces for heat, as we are in a very
temperate climate. Are there other applications for the HeatMAX in my area?
Yes! Often overlooked, the many home water heaters use oil to heat the
water, even in the summertime.
Do
my customers get a guarantee?
YES! All MAX Products Carry an Unconditional
Customer Guarantee. International Research & Development will make a
full refund directly to any consumer who is not completely satisfied with
the result of any IRD product within (3) months from the date of purchase
(Proof of retail purchase and returned unit are required.)
International Research & Development
will replace any faulty IRD product, or unit that is believed to have lost
strength, or to be considered defective in any way. The unit should be
returned to the store where it was purchased. The manufacturer will
immediately replace or repair the original unit and return it directly to
the consumer or dealer without charge. |