5212 Chelsea Street
San Diego, California
92037 USA
MADE IN USA
How Does HeatMAX Work?
The HeatMAX
operates on the principle of Resonance.
By way of its
patented Neodymium super conductors it generates the specific
resonance frequency that when installed over the fuel line, can
fracture the hydrocarbon chains in the passing fuel.
A picture of the test boiler firebox when 4 HeatMAX units were installed.
The boiler firebox was cleaned 2 weeks earlier and it can
easily be seen that the unit is already quite covered with soot.
A picture
of the same boiler, taken 10 weeks after HeatMAX installation, which is 12
weeks after cleaning. Normally the boiler needs to be cleaned every 6-8
weeks.
In the photo you can see that the hard scale deposits on the
horizontal plates has fallen away. The Client reports these scale deposits
normally must be removed with a firebox cleaning.
In addition, the fuel
gas temperature is now lower than it normally is after the regular soot
cleaning.
The HeatMAX Fuel
Conditioning System accelerated combustion. Now using less fuel, the system
produced a hotter and dramatically cleaner burn cycle.